5V 12mm Fullcolor led pixel light led signage outdoor color change advertising signs building decoraion
Specification
Product Name | 12mm Fullcolor led pixel signage |
Product Size | 12m diameter |
IC mode | 1903IC/ 6803IC/2811IC |
Voltage | DC 5V |
Power | 0.3W |
Working Currency | 20mA |
Bean Angle | 160 |
Material | PVC |
IP Rate | IP67 |
Working temperature | -45ºC~+70ºC |
Warranty | 2 Years |
Package | 50pcs/string, 200pcs/bag, 5000pcs/carton |
Emitting Color | Red, Yellow,Blue,Green,White,Voilet, RGB,Fullcolor. |
Application | This led pixel light is widely used for all kinds of advertising letters,Name board, Wire bar,wall,building and stage decoration. |
Features:
1.Produce with Taiwan chip. high lumen, good color purity, lower light dissipation and long lifespan.
2.Compared with traditional lights, LED light has the advantage of energy saving, environment friendly, long lifespan, Stable well, install conveniently, ect.
3.Monocolour achieve the effect of advertising signs keeping lighting state, fullcolor string suitable for advertising sign whose color is changed always, It makes outdoor advertising signs board produced easily and beautiful appearance.
4.Suitable for different material board like Aluminum substrate , stainless steel plate,ect. install conveniently.
5.Every piece is connected with series method, If one is down, Just need to exchang the break one. Much different from the kind that need to exchanged the whole roll sting if there is only 1 pcs gone down.
6.flexiable enough for installation, high strength, High and low temperature resistance,anti ultraviolet, aging-resistant, Waterproof IP67.
The Driver select and installation:
1.Total load power of the driver should not be over than 80% of the driver rated power.
For example: Driver output:DC5V,40A, Rated power is 200W. the load power should not be over
Than 200*80%=160W. If every pcs light is 0.1W, Then the quantity should not be over than
160/0.1=1600pcs.
2.If there is more than one driver, Pls make sure that there is no reture circuit.Otherwise the drivers
Will be burn out.
3.Connect ways: When connect the string with driver, pls keep the beging and the end contacted with the main wire . and main wire must be 2.5 mm
Full color led controller is needed for Fullcolor LED pixel light.
Attentions:
1.Pls confirm the dirver is DC5V output.
2.The wire connected with driver shouldn't be less than 2.5 mm2,If the quantity is big,the wire should be more thicker.
3.Pls make sure of the positive and negative of string, usually the negative is white.
4.Pls hold the middle of the sting with moderate strength and keep it from being damaged.
Packing Details
1.50pcs/string
2.20strings/bag
3.15bags per carton 48*42*30cm.
Payment Terms
1.Price: EXW,FOB,CIF
2.Banks: Paypal, Western Union, HSBC Bank.
3.Payment: 30% deposit before production,70% before shipping.
Shipping Terms
a. By express door to door ; like DHL;TNT;UPS;FEDEX;EMS etc. Usually 3-6days.
b. By air to your local airport, usually 7-10days.
c. By sea for large quantity,usually 20-40days.
Candice Tian
Export Manager
Shenzhen Oxford Lighting Co.Ltd
a:Shenzhen ,China
e: oxford.adsleds@yahoo.com
Find me on WhatsApp:+86 13809882437 |