LED Display SD Card for RGB LED Video Controller

- Jul 01, 2017-

1T-200k System features

    1.32—256 Gray levelSupport software Gamma correction

2. Support the rules and special-shaped handle.

3. 8 ports outputone port can support 512-1024 pixels

4. offline (SD card) control and on-line control can be combined using multiple controllers, the contents of the offline control program stored in the SD card.

5. Compatible with single line or double line chips.

6. If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M

注:T-200K Off-line(SD Card) control need to be the first master controller insert SD card.

T-200 K in the PC software compatible with T-100 K-B

 

NOTE1. When T-200k controller control less than 512 lamps the frame rate can reach 30fps. When T-200k control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.

2. T-200k must use the new software LedEdit 2012.

2、Support chips:

 

Chip   type

Software   code&

Controller type

Lamps/(MAX)

Note

LPD6803,D705,1101,6909, 6912

T-100K-B-6803

8192

32 gray level

LPD8806,LPD8809

T-100K-B-8806

4096


TM1803,TM1804,TM1809,TM1812

T-100K-B-TM

4096

TM1804 and TM1809 are divided   into high and low

TM1903TM1904TM1909TM1912

T-100K-B-TM19

4096


UCS6909UCS6912UCS7009UCS5903

T-100K-B-UCS32

4096


UCS1903UCS1909UCS1912

T-100K-B-UCS256

4096

divided   into high speed and low speed

UCS3903

T-100K-B-UCS1024

4096


DMX512

T-100K-B-DMX

1360/4096

Compatible with standard   DMX512

WS2801,WS2803

T-100K-B-WS

4096


WS2811

T-100K-B-WS2811

4096

divided into high speed and   low speed

DS189

T-100K-B-DS189

4096


TLS3001,TLS3002TLS3008

T-100K-B-TLS

4096


P9813

T-100K-B-P9813

4096


SM16715

T-100K-B-SM16715

4096

divided into high speed and   low speed

SM16716

T-100K-B-SM16716

4096


BS0901,BS0902

T-100K-B-0901

4096


BS0815

T-100K-B-0815

4096


 

  NOTEif chip is 256 grade gray level and Single-line IC choose .When programming choice high speed mode and one interface controls 1024 lamps the play speed can reach 30 frames/s. Double-line IC or single-line IC with low speed , one interface controls 512 lamps the play speed can reach 30 frames/s.

 

3.Appearance picture

led strip controls.jpgled dmx control.jpg

4.The meaning of flag 

                        TTL signal(245 signal)

AC IN

Exchange

220V power supply

COM(common port)

GND (ground   wire)

POWER

POWER LIGHT

DAT

Signal

STATUS

Status light

CLK

The   clock line

SD CARD

SD card slot



NOTEAccording to TTL signal outputGround of the controller must be connected to the lamp’s ground.

  5.System architecture figure


NoteThe IP address of the computer should be set to: 192.168.60.178

6.  wiring diagram

7. Application scope

LED digital tube,LED point light sourcethe exterior light and a module pixel screen (dazzle colour screens) high power DMX lighting.

8.Specific parameters

   Memory card

         TypeSD cardif controlling so many lamps it is best to use the high-speed SD card.

         Capacity128MB—2GB

         FormatFAT

 Store file*.led


         


Previous:Hot Selling Product Indoor 12V 60W Costant Voltage LED Strip Power Supply Next:Warm white,Pure white,Daylight,Cool white,What is the defference?