Led controller T-200K can be connected to PC

- Aug 04, 2016-

T-200k System features

    1.32—256 Gray levelSupport software Gamma correction

2. Support the rules and special-shaped handle.

3. 8 ports outputone port can support 512-1024 pixels

4. offline (SD card) control and on-line control can be combined using multiple controllers, the contents of the offline control program stored in the SD card.

5. Compatible with single line or double line chips.

6. If the controller to the lamps distance can choose photoelectric isolated transmission and as far as several distances of up to 200-300 M

RemarkT-200K Off-line(SD Card) control need to be the first master controller insert SD card.

T-200 K in the PC software compatible with T-100 K-B 

NOTE1. When T-200k controller control less than 512 lamps the frame rate can reach 30fps. When T-200k control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.

2. T-200k must use the new software LedEdit 2012.

Specific parameters

   Memory card

         TypeSD cardif controlling so many lamps it is best to use the high-speed SD card.



 Store file*.led


   Physical parameters        

Working temperature-30—85                   


        Working voltageAC220V

        Working power8W


        Signal port3pin connect port

Previous:high brightness cost-effective 1.5W injection led module 5730 Next:Mini pixel led lightens your colorful world